Hi,
Our product use R-car S4 and whitebox 5.1. We want to use trace32 or e2 emulator to debug.
Do I need to enable JTAG or add JTAG driver?
Thanks!
Best Regards,
Johnny
If you use S4 Starter Kit. You can enable JTAG using S4 Configurator tool. Refer to this page: R-Car/Boards/S4SK - eLinux.org
For Spider board, you can download the quick setup manual in this web page that contain the switch setting for JTAG: RTP8A779F0ASKB0SP2S - R-Car S4 Reference Board/Spider | Renesas
Duy Dang
Hi Johnny,
More than 2 weeks have passed since this ticket was last updated. If this topic will be discussed continuously, please update it. If there is no update by 7/11, it will be automatically closed.If you have any updates or want to ask another question, please post new question.
You can close it.