RH850/F1K 100PIN

Question

Hi all 
 I'm trying to debug/download executable file to RH850/F1K 100PIN type, based on RFP V314, by E1 Debugger tool. Here is Error message: 
 
 Is there any Flash E1 Pin_Circuit between ECU and female connector information as reference to help me solve the trouble? thanks

Fragero · Accepted Answer

The error indicates an issue in the HW-interface. If you are using a Renesas evaluation board (e.g. a ASK or a piggyback board) please check the jumper setting. If you designed your own board please check the recommended circuit described in E1/E20 Emulator, E2 Emulator Additional Document for User's Manual (Notes on Connection of RH850/F1K) figure 2.4 - figure 2.6.

RH850/F1K 100PIN

Top Replies