Issue in addition of Wi-Fi module ATWINC1500 driver stack on SSP version 1.7.5

Question

I'm facing an issue in adding ATWINC1500 driver adding in SSP 1.7.5. It shows "some components do not match this SSP version" in BSP section and unable to execute the program. please help.

Jayesh (SWF) · Answer

Hello Kezi. 
 You can refer to the following page on KnowledgeBase which addresses the same issue: 
 https://en-support.renesas.com/knowledgeBase/19074126 
 Kindly let us know if you need any further help. 
 Jayesh