I am trying Display Program in E2Studio 2022 SSP2.40 . Previously using E2Studiio 7.80 SSP1.63. In Configuration of PIN I find some differences, I have old hardware and I cannot the pins, What to do now.
in SSP1.60 P601 was allotted to WR_WR0_DQM0 and now in SSP2.40 it is WR_DQM . Both are same ??
In SSP 1.60 P608 was allotted to A00_BC0_DQM1 and now in SSP2.4.0 it is BC_A_DQM00 Both are same ??
Yes, I think they are the same, just the name has been shortened.
In the user's manual of the S7G2 you can can find the description of these pins and it matches their old names:
Also if you are using the display, you need to make sure that these pins are connected to the LCD_DATA_03 and LCD_DATA_07 of the LCD, respectively.
If this response, or one provided by another user, answers your question, please verify the answer. Thank you!
Renesas Engineering Community Moderatorhttps://community.renesas.com/https://academy.renesas.com/https://en-support.renesas.com/knowledgeBase/