Flashloader_pack1.X.0.exe

Hi victor,

For SSP 1.3.0 there is a newer version of the Flashloader Framework - v1.1.0. You will find the framework in the Synergy Gallery: synergygallery.renesas.com/.../utility

The downloaded archive contains .exe installer in Flashloader_DK-S7G2\Flashloader_Module, which will install the .pack file for the selected e2 Studio instance. There is also the .pack file without an installer.

Regards,
adboc

Hi

I am also looking for Flashloader_pack1.3.0.exe - can anyone tell me where it is currently at

many thanks,
alan..

HI Bj,

You should unzip the file and place the unzipped .pack file in internal/projectgen/arm/packs folder in e2 Studio directory, for example: C:\Renesas\Synergy\e2studio_v6.2.0_ssp_v1.4.0\internal\projectgen\arm\packs

Regards,
adboc

Hi adboc,

I unzipped the Renesas.Synergy_flashloader.1.4.0.pack and put it in internal/projectgen/arm/packs. What should I do to use it in my e2 studio project? I mean to refer to sf_bootloader.h for example

Thanks

Hi Bj,

In the configurator, please open Threads tab > New Stack > Renesas > Flashloader - there will be all flashloader frameworks available.

Regards,
adboc

When I unzip the folder Renesas.Synergy_flashloader.1.4.0.pack.zip and put it in the internal\projectgen\arm\packs, it appears as a folder and nothing happens in e2 Studio.

Otherwise, if I just rename Renesas.Synergy_flashloader.1.4.0.pack.zip to Renesas.Synergy_flashloader.1.4.0.pack and put it in internal\projectgen\arm\packs, it seems to be regonized as a pack file since I have a message in e2 sutdio which makes me notice that "Changes to the CMSIS Pack Folder have been detected"

However i can't see the module in Threads tab > New Stack > Renesas > Flashloader. Is there sonmething I missed?

Thanks

I made that I described above and I restarted e2 studio, I can see now Flashloader in Threads tab > New Stack > Renesas .
However there are only three possibilities and not the one I used in Renesas.Synergy_flashloader.1.3.0.pack . Bootloader Framework on sf_bootloader_mcu is missing in Renesas.Synergy_flashloader.1.4.0.pack
Does anyone have a suggestion?

Hi Bj,

Sorry, you're right, it's needed to rename *.pack.zip to *.pack and place it in packs/.

I've just created a new project and see the Bootloader Framework on sf_bootloader_mcu available. Have you selected SSP 1.4.0 in BSP tab?

Regards,
adboc

Hi adboc,

Thanks for your help, I also tried with a new project and I could see all modules. However, I couldn't see them in my existing project so I deleted it from my workspace and imported it again.

When I opened my project and built with SSP 1.4.0, it didn't remove bootloader component (certainly because the pack is recognized) and the build is ok.

However I still can't see all modules in Flashloader but my project works, it's not a problem for now but I can't add some modules if needed.

Thanks,

Bj

Hi Bj,

Could you check if there are no components from SSP older than 1.4.0 in Components tab? I suggest removing .module_descriptions directory, it will be generated again when opening the project.

Regards,
adboc

Hi Adboc,

I checked and all components come from SSP 1.4.0. I did what you suggested by removing .module_descriptions directory, when I opened the project it generated again the directory but I couldn't see the flashloader module in Threads tab > New Stack

Regards,
Bj

Hi All,

As I said above, it works for one of my projects but I can't see all the modules in Threads tab > New Stack > Renesas. That's not a problem for this project, however I need to add a module to another existing project and I can't.

In the C:\Renesas\e2_studio_6_2_0\internal\projectgen\arm\packs there is the Renesas.Synergy_flashloader.1.4.0.pack. I tried to remove it and add it again, the change has been detected in e2Studio but I have this message:
"Installing Synergy support files: Renesas.Synergy_flashloader.1.4.0.pack... No support files present."

Regards,

Bj

Hi All,

As I said above, it works for one of my projects but I can't see all the modules in Threads tab > New Stack > Renesas. That's not a problem for this project, however I need to add a module to another existing project and I can't.

In the C:\Renesas\e2_studio_6_2_0\internal\projectgen\arm\packs there is the Renesas.Synergy_flashloader.1.4.0.pack. I tried to remove it and add it again, the change has been detected in e2Studio but I have this message:
"Installing Synergy support files: Renesas.Synergy_flashloader.1.4.0.pack... No support files present."

Regards,

Bj