RA:The Trust Zone in RA6M5

Question

在我下载并调试了官方信任区例程到开发版本后，出现了以下问题。使用的开发方式是联合项目开发，调试已经在中断程序 中了 我该如何解决这个问题

IK_Renesas · Answer

Hello, 
 Thanks for reaching out Renesas Engineering Community! 
 Please let me inform you that if you need support in Chinese language, for your better support you should post your question on the RA Forum of the Chinese Community. 
 https://community-ja.renesas.com/zh/forums-groups/mcu-mpu/ra-mcu-fsp 
 
 A common issue would be the lack of stack that makes your code enter the Default Handler. Have you tried to increase the stack under BSP stack and make main stack size bigger as shown bellow? 
 
 Also check the document provided bellow with a list of the common exception for RA MCUs. 
 https://www.renesas.com/us/en/document/man/ra6m5-group-users-manual-hardware?r=1493931 
 
 Hope this helps. 
 Regards, 
 IK