Hello.
I am working with RA6T1 chip.
Today when I debug it with e2studio, the console report this:
I tried several times, it always be like this. And I tried another ra6t1, it works good.
So I think maybe the code flash of this chip is damaged.
I use this problem chip less than 6 month, and in my application software, it will erase and program the code flash, but this operation is not so much times,
I think the total erase and program times of this chip is less than one thousand. And I test my software again today, it erase and program flash very less.
So I am confused about this. I checked the manual, it doesn't tell me the exact erase times, but it should be more than 100,000 cycles according my experience.
Hello Alex,Thank you for posting your question online.At first, can you please reset the MCU and try to flash a new application?On e2 Studio:Then, try to flash the application again.Please follow the beforementioned steps and let us know the outcome.Thank you,Panos
Hello, I did as you said. And here is the outcome:
Thanks.
So what is the probably reason? Is the flash damaged?
Hi Alex,
According to the error message shows, it is most possible that the flash is broken.
ok, thanks.