Hello,
according to the "Renesas RA Partner Ecosystems Solutions" list, there is the possibility to utilize a WiFi module called ATWINC1500 by the company Reloc.https://www.renesas.com/en/products/microcontrollers-microprocessors/ra-cortex-m-mcus/ra-partners/reloc-wi-fi-fsp-driver
Could you please tell me how to use this module with FSP 5.5.0 and ThreadX?The only place to find some driver software was this page: https://www.reloc.it/products/pmod-wifi-atwinc1500-and-drivers/Unfortunately it refers to an old version of FSP (v3.5.x). I ran the installer but since then there is apparently no new WiFi stack available. Am I missing something here?Thanks in advance.
Hello Ghost_iQ,
It seems that this specific Wifi module is supported only through FreeRTOS with Renesas RA FSP.
I will check internally, if there is any available ThreadX project for this module and I will inform you.
Regards,
AL_Renesas
I am interested, as well.
We have a project with RA6M3 and FSP 5.xxx and would like to extend that with a Wifi module
After internal discussions, the ATWINC1500 module is not supported for the latest versions of FSP.
There is documentation/app note, sample code with RA6 for other WI-FI modules such as DA16200MOD.
For more information, you can check on the link below:
DA16200MOD - Ultra-Low Power Wi-Fi Modules for Battery Powered IoT Devices | Renesas
Thank you for your reply and clarification. I really appreciate your efforts and would like to thank you for pointing out an alternative product.