Ethernet Connectivity Issue

Question

I am currently working on EK-RA8D1 board, ethernet sample code working fine network up. if i configuration new FreeRTOS+TCP stacks, network is not up. I have attached the code. I would greatly appreciate your assistance in bringing up the Ethernet interface.Your guidance in resolving the Ethernet interface issue would be sincerely appreciated.Thank you. 
 
 File : drive.google.com/.../view

kishore · Accepted Answer

Hello IK_Renesas, 
 Thank you, code what you shared is working. 
 I found the problem in my code, PHYIC Reset input port pin configuration issue(P706), below change in pin_data.c worked, 
 { .pin = BSP_IO_PORT_07_PIN_06, .pin_cfg = ((uint32_t) IOPORT_CFG_DRIVE_HIGH | (uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_HIGH) }, 
 FSP Version 5.8.0 this pin default configuration (Problem) 
 { .pin = BSP_IO_PORT_07_PIN_06, .pin_cfg = ((uint32_t) IOPORT_CFG_PORT_DIRECTION_OUTPUT | (uint32_t) IOPORT_CFG_PORT_OUTPUT_LOW) },

IK_Renesas · Answer

Hello kishore , 
 Thanks for reaching out Renesas Engineering Community. 
 Well I checked a little bit your project and looks like you are using the pins for Ethernet B. 
 In order to use Ethernet B you need to have in the switches these configurations:

Is SW1-5 enabled and set to ON? 
 
 Also I see that you have DHCP disabled, which means that the DHCP server does not operate to get your network configurations and set a dynamic IP address to device. 
 Are the settings in the code correct and corresponding to your network configurations? 
 I mean these as set in the example should be adjusted according your network settings: 
 
 Also have you made sure that the specific IP is not occupied by any device in your network? 
 
 Please check these first. 
 And I will check your example project in more detail. 
 
 Thanks and Regards, 
 IK

IK_Renesas · Answer

Hello kishore , 
 Please find attached a project, I have created for you which simply configures the device to obtain a static IP fro the network as you wish to do: 
 
 And I can also see it in the web interface of my Wi-Fi router:

ek_ra8d1_static_ip.zip 
 Hope it helps. 
 Best Regards, 
 IK

Ethernet Connectivity Issue

Top Replies