Connect manual RH850 r7f7p15223

Question

Hello friends. Please help a newbie)) I want to find a manual on connecting to rh850 microcontrollers, where can I find them, maybe in c+ or e2 studio?

AZ [Renesas] · Accepted Answer

Hello, 
 I dont think there is a special document for this, you just need to select the emulator you have on the debug configuration settings. Which IDE are you using CS+ or e2studio ?

Dany · Answer

I use Cs+. and how do I connect to the chip?)) I want to understand how it works)

Dany · Answer

Unfortunately, no. I have e2 lite and e1 tools. I am still new to this business and learning where and how to connect and what to do)

JimB · Answer

Assuming that your device is RH850/F1H (R7F7 0 1522), if by connect you mean the hardware interface, you can refer to the document E1/E20 Emulator, E2 Emulator Additional Document for User's Manual (Notes on Connection of RH850/F1H and RH850/F1M) : 
 www.renesas.com/en/search?keywords=r20ut3116 
 Section 2 Connection Exampls:

JimB · Answer

If this MBUX hu6 is a production unit produced by someone else, you would need a probe for the pins required for the debug connector, but it is very likely that the device has been locked or secured either with a security ID or partial / full disabling of the debug / programming interface. There is no way to tell what security measures might have been put in place until a physical connection with the E1 can be made, and a tool such as RFP can try to connect.