RL78 G23 TAU0 in Interval Timer mode start with ELCL event

Question

Hi, 
 I want to check if it is possible to start TAU00 in Interval Timer Mode with an external interrupt routed to TI00 using ELCL (Through). 
 Thank you

AZ [Renesas] · Accepted Answer

Hello, 
 I have taken a good look at the hardware manual and I am afraid that it is not possible to start an interval timer (TAU or ITL) with a hardware trigger from an ELCL event. 
 For TAU interval timer the start trigger can only be a write to the Timer channel start register m (TSm)

Similarly for ITL the start trigger is only writing to the Interval timer control register (ITLCTL0).

RL78 G23 TAU0 in Interval Timer mode start with ELCL event

Top Replies